logo


Number: 48

Display:

  • Density measurement for resid hydrocrackers

    Level and density measurement on Resid Hydrocracker reactors. The resid hydrocracking process is becoming more and more attractive to refiners as it allows a higher conversion rate than other heavy oil conversion processes. It is used to crack heavy fractions to achieve lighter and more valuable products. Resid hydrocrackers are challenging to operate due to the complex set of reaction vessels, catalyst handling and separating units, and elevated temperatures and pressures in ...

  • Ametek Natural Gas Solutions

    Real-Time Measurement for Unparalleled Safety and Product Quality Control. Analyzer solutions to reduce natural gas process downtime, ensure safe operation, and meet stringent product quality requirements. Natural gas is an important part of the world’s energy supply. From feedstock for production processes to generating electrical power, the transportation, distribution, storage, and processing of natural gas has a global impact. Natural gas must meet specific requirements ...

  • Ametek Refinery Solutions

    Real-Time Measurement for Unparalleled Safety and Control Analyzer solutions to reduce process downtime, ensure safe operation, and optimize production efficiency in refinery operations. Process safety and optimized combustion control are essential for operating today's fired equipment through the measurements of excess oxygen (O2) and combustibles (CO+H2). Reliable indication of low-combustion O2is critical to the effectiveness of the Burner Management System in a fired ...

  • Boyancy technology brochure

    The Total Spectrum of Solutions Magnetrol® products employ many technologies for the measurement and control of level and flow. Buoyancy technology, with its utilization of float and displacer sensing elements, represents our most time-tested product group. To this day, buoyancy technology provides optimum solutions for many of today’s level control challenges.

  • Continuous level - Non-contacting measurement

    Non-contacting measurement technology by Berthold. The level measurement technology by Berthold is used in a variety of industrial sectors – ranging from the chemical to the waste water industry. It is suitable for measuring ranges of just a few millimetres up to several metres. Applications are particularly successful when facing extreme measurement conditions: - Extreme temperatures - High pressure - Excessive foam formation - Dust Acid or abrasive media Our level ...

  • Digitalization manifesto - Now its time

    At KBC we believe in a world where plants operate with: No safety incidents, No unplanned outages, Rigorous adherence to operating plans, Agile response to market changes and plant disturbances, A motivated and informed workforce, A culture of profitability. We call this ‘Excellence’. KBC exists to help its customers in the Energy and Chemical industry realize value through achieving excellence. Digitalization is one of the key strategies a plant can adopt in pursuit ...

  • DuoSeries LB 47x / 4700 2-wire measuring system

    DuoSeries LB 470 is the radiometric level measurement from Berthold with 2-wire technology, which is now also available with radiation interference detection (RID). The level measurement DuoSeries is characterized by particularly high accuracy and reproducibility. Because of its superior stability, the DuoSeries is the first choice for demanding processes and wherever maintenance and control technology is used.

  • Echotel® ultrasonic level switches

    The less you will worry if a tuning fork is up to the job of providing the outstanding quality, reliability and overfill prevention your facility needs. Echotel® ultrasonic switches provide continuously accurate and reliable level control that outperforms tuning fork technology. While tuning forks have been widely adapted by the industry, the fact is Echotel ultrasonic switches offer more benefits.

  • ElemeNtS

    Simultaneous analysis of total sulfur and total nitrogen in one single run. ElemeNtS is the most advanced, modular analytical system available for the detection of Total Nitrogen and/or Total Sulfur content in solid, liquid, gaseous materials and LPG samples. ElemeNtS is available in a vertical configuration with direct injection, and horizontal with boat inlet introduction. Both configurations can be equipped with dedicated detectors: ElemeNtS-N for Nitrogen analysis, ElemeNtS-S ...

  • Exchanger leak testing - chemical tracers

    Tracerco has been at the forefront of the development of online leak detection for the last 40 years. The method allows the detection of leaks as small as 0.5%. However, customer demands to measure smaller leaks affecting product quality, has prompted extensive research to develop alternative online methods. Through the development of specialist chemical tracers leaks as small as 0.0001% are readily identified. Project Field Test In the following case study, Exchangers A and ...

  • Float chamber design guide

    More instrumentation professionals trust their operation’s safety and performance to Magnetrol, the market leader in unfailingly reliable mechanical buoyancy liquid level switches. This guide details the design elements that give our external cages the structural integrity demanded of your toughest level control applications. Design Integrity in the Details There’s a reason Magnetrol-tough liquid level switches are the No. 1 brand of mechanical buoyancy instrumentation. ...

  • Flow Control Solutions for Petrochemical Applications

    Today’s petrochemical producers face ever-increasing regulatory, environmental and performance demands. Now, more than ever, you need more than just a valve supplier. You need a reliability partner who offers deep application knowledge with a complete offering of technologies, customer support and services. Today’s petrochemical producers face ever-increasing regulatory, environmental and performance demands. Now, more than ever, you need more than just a valve supplier. ...

  • Flowrox Pump Solutions

    Flowrox industrial pumps serve a wide range of process industries. Peristaltic hose pumps and progressive cavity pumps are specifically designed for demanding processes involving abrasive, corrosive, highly viscous or crystallizing media with high solids content. Over 45 years of industry experience   Flowrox peristaltic hose pumps are installed worldwide in numerous slurry applications, as well as progressive cavity pumps in paste pumping applications. With more than ...

  • Covering your streams with gas chromatography: Analytical technique and key applications

    Gas Chromatography is a critical part of any analytical lab in the refining process. It is such a standard that operators take for granted all the ways it is used. Join us as we will be touching on the importance of GC in the lab, what goes into selecting a unit, and three key applications seen in many labs: Refinery Gas Analysis, Group type Analysis with Reformulyzer pre-frac, and Simulated Distillation. In this webinar we will: - Give an overview of the importance of GC ...